DENAFRIPS ARES

ARES

The Ares DAC is a 20Bit/1536KHz, native DSD1024, discrete resistor ladder Digital To Analog Converter, also known as R-2R DAC.

The architecture uses the most primitive R-2R DAC technology, it is probably the most suitable architecture to reproduce music. Despite the test results of various measurements and parameters of the conventional R-2R DAC are usually not as good as the mainstream integrated DAC chip, but the sound of R-2R DAC, is often filled with emotion, comfort, high fidelity, transparency, and additive musicality that most of the common mainstream integrated DAC chip cannot match.

SYMBOL OF HIGH-END DAC

To achieve a decent sounding R-2R DAC, the use of ultra-precise resistors is necessary. The cost of high precision resistors is expensive, each resistor must be stringently measured and matched by machine with human intervention to cross-check. These results in a very high cost in the manufacturing process, hence, R-2R DAC is also a symbol of high-end DAC.

 
SMALL IN SIZE BIG IN SOUND

The Ares employs true balance R-2R DAC design. Each channel is decoded by 4 sets of R-2R network. This design has a very small linear error, high decoding speed, low digital noise, not only to ensure that the audio signal is low distortion, but also to ensure a very low background music noise; allow the listener to enjoy the true music with a dark background.

Native DSD decoding support up to DSD1024 and PCM decoding supports up to PCM1536. Choice of NOS or OS, Slow or Sharp filters, the Ares II upgrade just make the already awesome DAC a few notches better!

Above information taken from Denafrips Website.

SPECIFICATIONS

R-2R DAC:

 

  • Proprietary R2R + DSD Architecture

  • True balanced 20BIT  R2R +  6BIT DSD (32 steps FIR Filters)

  • Native DSD decoding with 0.01% precision resistors

Highlight:

 

  • Low Noise Power Supply

  • Digital Signal Processing via FPGA

  • DSD1024, PCM1536 Supports On USB Input

  • Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU

  • Licensed Thesycon USB Driver For Windows Platform

  • Driverless On Mac & Linux

DSD:

 

  • DSD64-DoP On All Input

  • DSD1024 On USB Input 

PCM:

 

  • 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input

  • 1536kHz On USB Input

Digital Input:

 

  • Coax x 2 

  • TOSLink x 2

  • USB

Analog Output:

 

  • RCA at 2.2Vrms, 625 Ω

  • XLR at 4.4Vrms, 1250 Ω

Sampling Mode:

 

  • Non-Oversampling NOS / Oversampling OS

 

Filter Selection:

 

  • Slow / Sharp

AC Power Requirement:

 

  • 110/240VAC, 50/60Hz

  • Power Consumption ≤20W

  • Frequency Response 20-70KHz -3dB

  • THD+N0.004%

  • S/N Ratio115dB

  • Dynamic Range >119dB

  • Stereo Crosstalk-124dB

  • Dimension 215 x 230 x 45 mm

  • Weight 3.5 Kg

  • Colour Black

  • Warranty 36 Months

For more information or to purchase this item please contact us here or call us on the number below.

           

Tel: 07412690415

  • Facebook
  • Instagram

2020 by Willow Tree Audio. ©