DENAFRIPS TERMINATOR

TERMINATOR

The Terminator is DENAFRIPS' flagship DAC. Being a flagship, the Terminator is filled with our years of R&D achievement in it. State of the art fourth generation discrete resistor 26Bit R-2R for PCM decoding, 6Bit DSD hardware decoding with 32 steps FIR filters, a total breakthrough of the traditional integrated chip constraints.

SOPHISTICATED DESIGN

The DAC core conversion module R-2R is constructed with 0.005% high precision, 10ppm low thermal effect precision resistors. Each channel uses more than 500pcs of these precision resistors, or 1000pcs for two channels, it's 4 times more than the other typical R-2R DAC. These achieve a truly astonishing low distortion, full balanced design. Crystek flagship ultra low phase noise FEMTO clocks are used with FIFO technology to ensure the DAC clock is independent to the input signal.

STATE OF THE ART LINEAR POWER SUPPLY

Dedicated encapsulated beefy linear power supply unit, designed in a thick metal alloy enclosure, can be found underneath the DAC board with additional steel plate divider between them for extra shielding. The box-within-box design, not only does it eliminates the inherited problems of dual box solution, it presents the micro details and attentions DENAFRIPS put into the flagship Terminator.

 

Beefy dual O-Core Transformers for Digital and Analog sections, Ultra-Low ESR, Long Endurance Reservoir Capacitors, and multi-stages super linear power supply, ensuring ultra precision, low ripple power supply charging up DAC.

TRUE REFERENCE DAC

The Terminator will be our True Reference Master Class DAC for the next 10 years.

Above information taken from Denafrips Website.

SPECIFICATIONS

R-2R DAC:

 

  • Proprietary R2R + DSD Architecture

  • True balanced 26BIT  R2R +  6BIT DSD (32 steps FIR Filters)

  • Native DSD decoding with 0.005% precision resistors

Highlight:

 

  • Encapsulated Ultra Low Noise Power Supply

  • CRYSTEK Flagship CCHD-957 Femto Clocks

  • New Improved Digital Signal Processing FPGA Code

  • DSD1024, PCM1536 Supports On USB & I²S Input

  • Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU

  • Licensed Thesycon USB Driver For Windows Platform

  • Driverless On Mac & Linux

  • Dual AES/EBU Input Supports

  • Sharp/Slow Filters Option

  • I²S Pinout Configuration

  • I²S DSD Channel Swap Configuration

DSD:

 

  • DSD64-DoP On All Input

  • DSD1024 On USB & I²S Input Only

PCM:

 

  • 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input

  • 1536kHz On USB & I²S Input

Digital Input:

 

  • Coax 1 via RCA

  • Coax 2 via BNC 75 Ω

  • TOSLink x 1

  • AES/EBU x 2 (Dual AES/EBU L/R Channel Input Supported)

  • USB

  • I²S via HDMI LVDS

  • I²S via RJ45 LVDS

  • I²S via RJ45 LVCMOS

Analog Output:

 

  • RCA at 2.3Vrms, 625 Ω

  • XLR at 4.6Vrms, 1250 Ω

Sampling Mode:

 

  • Non-Oversampling NOS

  • Oversampling OS

  • AC Power Requirement 110-240VAC, 50/60Hz

  • Power Consumption ≤20W

  • Frequency Response 20-40KHz -0.2dB

  • THD+N0.0010%

  • S/N Ratio -124dB

  • Dynamic Range >132dB

  • Stereo Crosstalk-110dB

  • Dimension 430 x 380 x 105 mm

  • Weight 19 Kg

  • Colour Silver / Black

  • Warranty 36 Months

For more information or to purchase this item please contact us here or call us on the number below.

           

Tel: 07412690415

2020 by Willow Tree Audio. ©

Denafrips Terminator DAC Back