KINKI STUDIO EX-M1

EX-M1 INTEGRATED AMPLIFIER

The EX Series is tuned to reproduce sound quality with balance mid and smooth extension in both ends, high and low extension. The EX-M1 is fully modular, a dual mono design in a single chassis. Rich in tonal quality, details, dynamic, and high resolution. Silky smooth volume control thanks to the MUSES volume control, of which known for its precise and accurate volume adjustment with precision matched resistors.

 

JRC MUSES 72320 VOL CONTROL

Most amplifiers use a potentiometer for volume control. EX-M1 uses an advanced microprocessor-controlled, JRC MUSES72320 2-channel electronic volume, which is optimized for high-end audio and professional audio applications with advanced circuitry and layout. The MUSES72320 performs low noise and low distortion characteristics and with resistance ladder circuit.

COST-NO-OBJECT

The EX-M1 uses extremely high cost 0.2µm gold-plated printed circuit board (PCB). From the perspective of PCBs, it is clear that the designer is well aware of the limitations on the fine contact area of the general circuit board, specifically increasing the soldered area at each solder joint and adding as much shielding as possible. 

 

It uses two 400VA encapsulated transformers, one each for Left and Right channel power supplies. Dual mono power rails does not interfere with each other to improve the channel separation.

C R A F T E D    T O    P E R F E C T I O N

PURIST  ·  PERFECTIONIST · MINIMALIST

You name it. It was engineered to meet the highest quality standard for you.

Above information taken from Kinki Studio Website.

SPECIFICATIONS

Parameters:

  • Frequency Response: 10-150kHz (±3dB)

  • THDN: 0.0232%; 0.006% (A-Weighted)

  • S/N Ratio: >103dB

  • Output Power: 215W (8Ω), 400W (4Ω), Both channel driven

  • Damping Factor: 2000

  • Gain: Normal Gain 26 dB

  • Max Output Voltage: 55VAC

  • AC Power: 110/240VAC, 50/60Hz (Factory configure)

Input / Output:

  • Input Sensitivity: 2.25Vrms - 3.6Vrms

  • Input Impedance: 50kΩ

  • Input Connector: RCA x 3, XLR x 1

  • Output: Speaker Binding Post 4mm L/R Channel

Dimension & Weight:

  • Dimension: 430W x 125H x 370D

  • Weight: 25KG

For more information or to purchase this item please contact us here or call us on the number below.

           

Tel: 07412690415

2020 by Willow Tree Audio. ©