top of page

Terminator 15th DAC

Terminator 15th DAC

£4,900



DIGITAL / ANALOGUE ISOLATION

the terminator 15th features complete isolation between the Digital processing board and R-2R ladder network arrays. physically linked by the OCXO module, this design minimises noise and enhances the signal-noise-ratio.

OVEN-CONTROLLED CRYSTAL OSCILLATORS - OCXO

equipped with dual OCXOs at 45.1584 MHz and 49.152 MHz, The terminator 15th ensures ultra low phase noise and exceptional accuracy. these OCXOs are housed in metal casing and powered by a specially designed, shielded power supply for optimal stability.

ADAPTIVE FIFO BUFFER RECLOCKING

the adaptive FIFO buffer stores digital audio data, which is read using ultra-low phase noise OCXOs, this data is converted to analog signals by true balance R-2R ladder network arrays, with high precision resistors ensuring linearity

HIGH PRECISION OCXO CLOCK OUT

the Terminator 15th features a high precision OCXO clock out, designed ti synchronise with various audio frequencies. The precision component supports.

Audio Frequencies 44.1 kHz, 48kHz

Clock Frequencies 22.5792 MHz , 24.576 MHz, 45.1584 MHz, 49.152 MHz

experience unparalleled accuracy and synchronisation in your audio setup with the Terminator 15th.

THE FOUNDATION OF SUPERIOR SOUND

dedicated linear power supply unit encased in a robust 1.5mm thick metal allot enclosure. additional steel plate divider between DAC and motherboard and PSU box for enhanced EMI/EMF shielding.

INNOVATIVE BOX-WITHIN-BOX DESIGN

eliminates issued associated with dual box solutions. Highlight the meticulous design and attention to detail form DENAFRIPS.

PREMIUM COMPONENTS

Dual O-Core Transformers for Digital and Analog sections. Ultra-Low ESR, Long Endurance Reservoir Capacitors, Multi stage super linear power supple for ultra-precise, low ripple power delivery

Specifications


R-2R DAC


  • Proprietary R2R + DSD Architecture

  • True balanced 26BIT R2R + 6BIT DSD (32 steps FIR Filters)

  • Matched Precision Thin Film 0.005% R-2R Network Arrays


Highlight


  • Encapsulated Ultra Low Noise Power Supply

  • High-end Oven Controlled Crystals OCXO

  • Total isolation of Digital and R-2R Boards

  • Adaptive FIFO Buffer and Reclocking

  • DSD1024, PCM1536 Supports On USB & I²S Input

  • Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU

  • Licensed Thesycon USB Driver For Windows Platform

  • Driverless On Mac & Linux

  • Dual AES/EBU Input Supports

  • Sharp/Slow Filters Option

  • I²S Pinout Configuration

  • I²S DSD Channel Swap Configuration


DSD


  • DSD64 / 2.8224MHz (DoP) on Coax/AES/Opt Input

  • DSD1024 / 45.1584MHz * On USB & I²S Input Only

  • PCM 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input

  • 1536kHz* On USB & I²S Input

Digital Input


  • Coax via RCA

  • TOSLink x 1

  • AES/EBU x 2 (Dual AES/EBU L/R Channel Input Supported)

  • USB2.0 Type B

  • I²S via HDMI LVDS

  • I²S via RJ45 LVDS

  • I²S via RJ45 LVCMOS

Analog Output

  • RCA at 2.2Vrms, 625 Ω

  • XLR at 4.4Vrms, 1250 Ω

Sampling Mode

  • Non-Oversampling NOS

  • Oversampling OS


  • AC Power Requirement 100-240VAC, 50/60Hz (Worldwide Voltage)

  • Power Consumption ≤20W

  • Frequency Response 20-40KHz -0.2dB

  • THD+N 0.001%

  • S/N Ratio 127dB

  • Dynamic Range >132dB

  • Stereo Crosstalk -110dB

  • Dimension 430 x 380 x 105 mm

  • Weight 19 Kg

  • Color Silver / Black

  • Warranty 12 Months

We accept all major credit and debit cards (Excluding AMEX) and direct bank transfer

  • Facebook
  • Instagram

Tel: 07412690415

2025 by Willow Tree Audio. ©

bottom of page