KINKI STUDIO EX-P7

EX-P7 PREAMPLIFIER

The EX Series is tuned to reproduce sound quality with balance mid and smooth extension in both ends, high and low extension. True Class-A biased, fully discrete input and output stages are the heart of the EX-P7. Rich in tonal quality, details, and high resolution. Silky smooth volume control thanks to the discrete R2R volume control, of which known for its precise and accurate volume adjustment with precision matched resistors.

 

 

R2R VOL CONTROL

Most preamps use a potentiometer for volume control. EX-P7 uses an advanced microprocessor-controlled, relay-based R2R steps attenuator. Ultra-precise 256 steps linear volume control allow you to fine adjust the volume for late-night-listening.

 

COST-NO-OBJECT

The EX-P7 uses extremely high cost 0.2µm gold-plated printed circuit board (PCB). From the perspective of PCBs, it is clear that the designer is well aware of the limitations on the fine contact area of the general circuit board, specifically increasing the soldered area at each solder joint and adding as much shielding as possible.

 

It uses two UK made AMPLIMO transformers, one each for Left and Right channel power supplies, so that the power does not interfere with each other to improve the channel separation. EX-P7 is essential dual mono design in the same chassis.

GOODBYE NOISE, WELCOME DARKNESS

The two UK-made AMPLIMO transformers are installed in the CNC-machined aluminium encapsulation, and the entire chassis is made of 8-10mm thick of anodised aluminium block, effectively eliminate the nasty EMI/EMC induced from the surrounding equipment.

SOUND CHARACTERISTIC

 

Neutrality and musicality were the goals to achieve. Rich tonal quality, vivid sound imaging, details, high resolution and dynamic. The choice of the components, design, and tuning does just that. 

 

It is the Kinki Studio gears' sound signature.

Above information taken from Kinki Studio Website.

SPECIFICATIONS

Parameters:

  • Frequency Response: 0-150kHz (±1dB)

  • THDN: 0.003% (-80dB)

  • S/N Ratio: >90dB

  • Channel Separation: >90dB

Input / Output:

  • Input Sensitivity: 2.25Vrms - 3.6Vrms

  • Input Impedance: 50kΩ

  • Input Connector: RCA x 2, XLR x 1

 

  • Output Voltage: 2.25Vrms - 3.6Vrms

  • Output Impedance: 75Ω

  • Output Connector: RCA x 2, XLR x 1

Dimension & Weight:

  • Dimension: 430W x 125H x 370D

  • Weight: 13KG

For more information or to purchase this item please contact us here or call us on the number below.

           

Tel: 07412690415

2020 by Willow Tree Audio. ©